General

How do I operate my aerated bait well?

This article is intended to provide general operational instruction for aerated bait wells found on Sea Born, Sundance, and Spyder...

How to clean the caulk in my boat’s seams?

The “caulk” used in your CRI boat is a UV resistant, polymer sealant made specifically for permanent elastic seals. Occasionally...

Operator’s Guide: Stepped Hull Boats

Purpose The intent of this document is to provide a clearer understanding of the operational differences between a stepped-hull vessel...

Where can I purchase replacement parts for my boat?

As we do not sell replacement parts directly to the public we recommend you contact your local CRI dealer for...

Is there any wood used in the construction of a Sundance, Sea Born, or Spyder?

No. Since our very first boat, we’ve never used any wood. All of our vessels are manufactured from all-composite materials....

What is the length from the waterline to the top of the bow on an LX24?

The top of the bow to waterline measures approximately 32″. This question is typically linked to the desire to install...

How do I restore my deck if it has turned a yellowish color?

Waxes, sunscreen oils, and other surface contaminates can start showing yellowish tint over time especially in warm, sunny climates. To...

What adhesive or caulking do you recommend for reattaching the rub rail?

We recommend using 3M 5200 marine sealant.

How do I remove the console backrest on my Sundance F19 CCR?

In order to remove the backrest, owners should look under the cushion, you will see a small stainless tab with...

I often have visible water in my Spyder near the aft drain plugs while fishing and at rest is this normal?

Where many of our boats are self-bailing, the Spyder FX19 and FX17 do not have this ability when occupied and...

Are the rear bench cushions removable on the 2017 Sea Born LX22 Center Console?

For the 2017 model year, the rear bench cushions on the Sea Born LX22 Center Console were not removable. Beginning...

What is the difference between a K16CC and K16BD?

The K16BD is designed for a more budget minded buyer versus the K16CC. The primary differences are: 1. The K16BD...

What’s the purpose of the sculpted channel that runs along the center of my boat?

In many of CRI’s skiff models, there are channels that run along the hull or the deck. Those channels are...

What are the gel coat color codes CRI uses for Sea Born, Sundance & Spyder?

The following codes represent the current gel coat color codes for all CRI boats from 2018-2022. Admiral Blue PCU FV...

What are the measurements of the NXL console?

Answer The attached downloadable PDF provides dimensions of the Composite Research, Inc. NXL console.

What adhesive or sealant was used to secure the rub rail on a 2005 B-20 skiff?

In 2005 all models used 3M 5200 marine sealant.